Troubleshooting - Kenwood KDC-3051M Instruction Manual

[SETTINGS]
Item
AUX NAME AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component. (Selectable
only if "AUX" is selected as the source.)
CLOCK CLOCK ADJ:
TIME SYNC:
DISPLAY DIMMER SET: ON: Dims the display illumination. ; OFF *: Cancels.
TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF:
RDS SET NEWS SET/ AF SET/ RDS REG/ ATP SEEK: Selectable only if any source other than tuner source is selected. (For
details, refer page 8.)
[TIME SYNC/ RDS SET] is selectable only with KDC-3051M/ KDC-315M.

Troubleshooting

Symptom
Sound cannot be heard.
"PROTECT" appears and no
operations can be done.
The unit does not work at all.
[P-OFF WAIT] does not work.
Radio reception is poor. / Static noise
while listening to the radio.
"IN" flashes.
CD-R/CD-RW cannot be played back
and tracks cannot be skipped.
Disc sound is sometimes interrupted. Stop playback while driving on rough roads. / Change the disc. / Check the cords and
"NA FILE" appears.
"NO DISC" appears.
"TOC ERROR" appears.
"ERROR 99" appears.
"COPY PRO" appears.
Noise is generated.
Tracks cannot play back as you have
intended them to play.
"READING" keeps flashing.
Elapsed playing time is not correct.
Correct characters are not displayed
(e.g. album name).
12
Selectable setting (Preset: *)
(For details, refer page 6.)
ON *: Synchronizes the RDS station time data and the unit's clock. ; OFF: Cancels.
Cancels. (Preset: KDC-MP249/ KDC-MP2049/ KDC-MP149: AUTO ; KDC-3051M/ KDC-315M:
OFF)
Adjust the volume to the optimum level. / Check the cords and connections.
Check to be sure the terminals of the speaker leads are covered with insulating tape
properly, then reset the unit. If "PROTECT" does not disappear, consult your nearest
service center.
Reset the unit.
Exit from the demonstration mode. (page 6)
Connect the antenna firmly. / Pull the antenna out all the way.
The CD player is not operating properly. Reinsert the disc properly. If the condition did
not improve, turn off the unit and consult your nearest service center.
Insert a finalized CD-R/CD-RW (finalize with the component which you used for
recording).
connections.
The unit is playing an unsupported audio file.
Insert a playable disc into the loading slot.
The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another
disc instead.
The unit is malfunctioning for some reason. Press the reset button on the unit. If the
"ERROR 99" code does not disappear, consult your nearest service center.
A copy-protected file is played.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Longer readout time is required. Do not use too many hierarchies and folders.
This is caused by how the tracks are recorded.
This unit can only display letters (upper case), numbers, and a limited number of
symbols. Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is set
to [ON]. (page 6)
Remedy/Cause