Wiring Connection - Kenwood KDC-3051M Instruction Manual

Wiring connection

Light blue/yellow
(Steering remote control wire)
Brown
(Mute control wire)
Blue
(Motor antenna control wire)
Blue/White
(Power control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
Blue/White
(Power control/motor antenna
control wire)
Red (A7)
Yellow (A4)
See "ISO connectors" on page 15.
14
KDC-MP249/
KDC-MP2049/
KDC-MP149
KDC-3051M/
KDC-315M
KDC-MP249/ KDC-MP2049/ KDC-MP149
White (+) / White/black (–) : To front speaker (left)
Gray (+) / Gray/black (–) : To front speaker (right)
Green (+) / Green/black (–) : To rear speaker (left)
Purple (+) / Purple/black (–) : To rear speaker (right)
To the metallic body or chassis of the car
Rear/subwoofer output terminals
Antenna
terminal
KDC-MP249/ KDC-3051M/ KDC-315M : To the steering wheel
remote control adapter (optional accessory)
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
system, consult your navigation manual.)
To the control terminal of the motor antenna
To the power control terminal of the optional power amplifier
Car fuse box
KDC-3051M/ KDC-315M
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
Red (Ignition wire)
Yellow (Battery wire)
See also "Connecting the ISO connectors on some
VW/Audi or Opel (Vauxhall) automobiles" on
page 15.
Fuse (10 A)
Ignition key switch
Car fuse box
Battery