Voice Operated Transmit (Vox) - Motorola CP185 Series User Manual

VOICE OPERATED TRANSMIT (VOX)

VOX needs to be enabled for each channel in Customer
Programming Software (CPS) before VOX Accessories can be
used with radio. When the VOX headset/microphone is
connected, your radio may be used in hands-free operation.
To start the VOX feature
1. Connect the VOX headset to the accessory connector of
the radio. Make sure the radio is turned OFF before
connecting the VOX accessory.
2. Turn the radio ON.
To disable the VOX feature
1. Press the PTT button on the radio. This allows you to use
the VOX headset, but you must press the radio PTT to
transmit.
To re-enable the VOX feature
1. Turn the radio OFF, and turn it ON again, with the headset
connected to the accessory connector, or
2. Change channel with the VOX headset connected.
To adjust the VOX sensitivity level, see "ACCESORY
(Accessory)" on page 17 of this user guide.
13
English