Voice Operated Transmission; Transmitting A Call Tone - Motorola TLKR T5 Owner's Manual

T5 Manual EU.book Page 9 Monday, September 3, 2007 9:30 AM

Voice Operated Transmission

Your TLKR T5 radio is equipped with a user
selectable Voice Operated Transmitter (VOX)
that can be used for automatic voice
transmissions. The VOX feature is designed for
hands-free purpose. Transmission is initiated
by speaking into the microphone of radio or
headset (headset is not included) instead of
pushing the PTT key.
To select the VOX level:
1. Enter the Select Menu. Advance through the
Select Menu until the icon blinks. The
current level (OFF. 1-5) also blinks. Level oF
(OFF) disables VOX, while levels 1-5 set the
sensitivity of the VOX circuit.
2. Press the or key to select the desired
VOX sensitivity level. Use Level 1 in quiet
environments, and use level 5 in very noisy
environments. You can find the appropriate
sensitivity level by speaking into the
microphone. If the icon flashes, your
voice is accepted.
3. Exit the Select Menu.
When you continue to transmit using VOX
Note:
function for 60 seconds, the radio emits
TX Time Out tone and the icon
flashes for 5 seconds.

Transmitting a Call Tone

Your TLKR T5 radio is equipped with 5
selectable call tones that will be transmitted
when the key is pressed.
To select a call tone:
1. Enter the Select Menu. Advance through the
Select Menu until the icon blinks. The
current call tone number (1-5) also blinks.
2. Press the or key to increase or
decrease the number to the desired call tone.
Each tone will be heard through the speaker.
3. Exit the Select Menu.
To transmit the selected call tone, press the
key. The selected tone will automatically be
transmitted for a fixed length of time. Call tone
will be cancelled when the PTT key is pressed.
9