Adjusting A Headlight Beam - Yamaha YFM25RX Owner's Manual

1. Do not touch the glass part of the bulb.
ECB00650
CAUTION:
Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of the
bulb, and the bulb life will be adversely affect-
ed. Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth
moistened with alcohol or thinner.
6. Install the headlight bulb holder by pushing it
in and turning it clockwise.
7. Install the headlight bulb holder cover.
10. Adjust the headlight beam if necessary.
1
EBU25550

Adjusting a headlight beam

ECB00690
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the adjusting
screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
1. Headlight beam adjusting screw
8-43
8. Connect the headlight coupler.
9. Install the headlight unit by installing the bolts.
CAUTION:
(a)
1
(b)
1
2
3
4
5
6
7
8
9
10
11