Yamaha YFM25RX Owner's Manual page 66

Do not ride in areas posted "no trespassing".
Do not ride on private property without getting per-
1
mission.
2
3
4
5
6
7
Select a large, flat area off-road to become familiar
with your ATV. Make sure that this area is free of
8
obstacles and other riders. You should practice
control of the throttle, brakes, shifting procedures,
9
and turning techniques in this area before trying
10 more difficult terrain. Always avoid riding on paved
surfaces: the ATV is designed for off-road use
11
only, and handling maneuvers are more difficult to
perform on pavement.
Set the parking brake and follow the instruction on
page 6-1 to start the engine. Once it has warmed
up you are ready to begin riding your ATV. As you
get on the ATV, be sure not to accidentally move
the shift pedal. Remember that the engine and ex-
haust pipe will be hot when riding and afterwards;
do not allow skin or clothing to come in contact with
these components.
With the engine idling, pull the clutch lever to dis-
engage the clutch and shift into 1st gear, and then
release the parking brake. Open the throttle grad-
ually, and at the same time, release the clutch le-
ver slowly. Once the ATV has attained adequate
speed, release the throttle lever and at the same
time, quickly pull in the clutch lever and shift into
2nd gear. Open the throttle part way and gradually
release the clutch. Use this same procedure as
you move into the higher gears. Be sure to coordi-
nate the use of the throttle and shift pedal properly.
If the throttle is applied too abruptly or if the throttle
is not released during shifting, or if the shift pedal
is not released before applying the throttle, the
front wheels may lift off the ground, resulting in a
loss of directional control. Avoid higher speeds un-
til you are thoroughly familiar with the operation of
your ATV.
7-15