Yamaha YZF-R1R Owner's Manual page 41

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Rebound damping force adjusting screw
Rebound damping force
To increase the rebound damping
force and thereby harden the rebound
damping, turn the adjusting screw on
each fork leg in direction a. To de-
crease the rebound damping force and
thereby soften the rebound damping,
turn the adjusting screw on each fork
leg in direction b.
CI-02E
26 clicks in direction b*
Minimum (soft)
13 clicks in direction b*
Standard
1 click in direction b*
Maximum (hard)
* With the adjusting screw fully turned in direction a
1. Compression damping force adjusting screw
Compression damping force
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting screw
on each fork leg in direction a. To de-
crease the compression damping force
and thereby soften the compression
damping, turn the adjusting screw on
each fork leg in direction b.
CI-02E
20 clicks in direction b*
Minimum (soft)
13 clicks in direction b*
Standard
1 click in direction b*
Maximum (hard)
* With the adjusting screw fully turned in direction a
3-19
CAUTION:
_
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
_
NOTE:
_
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.
_
EC000015