Adjusting the front fork
This front fork is equipped with spring
preload adjusting bolts, rebound damp-
ing force adjusting screws and com-
pression
damping
force
screws.
WARNING
_
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
_
INSTRUMENT AND CONTROL FUNCTIONS
EAU01862
adjusting
EW000035
1. Spring preload adjusting bolt
Spring preload
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection a. To decrease the spring pre-
load
and
suspension, turn the adjusting bolt on
each fork leg in direction b.
thereby
soften
the
3-18
1. Current setting
2. Front fork cap bolt
NOTE:
_
Align the appropriate groove on the ad-
justing mechanism with the top of the
front fork cap bolt.
_
CI-10E
Setting
Minimum (soft)
Standard
Maximum (hard)
3
8
6
1