Yamaha 6Y8-2819V-00 Owner's Manual page 30

01 (setting displayed units)
4. : Press to switch between the dis-
plays. In addition, you can select to not
show the display.
Speedometer
You can select to show miles per hour
(mph), kilometers per hour (km/h), or knots.
The default setting is miles per hour (mph).
TRIP
You can select to show miles (mile), nautical
miles (nm), kilometers (km), or not to show
the display. The default setting is miles
(mile).
FLOW
You can select to show gallons per hour
(gph), liters per hour (l/h), or not to show the
display. The default setting is gallons per
hour (gph).
ECON
You can select to show miles per gallon
(mpg), nautical miles per liter (nm/l), kilome-
ters per liter (km/l) or not to show the dis-
play. The default setting is miles per gallon
(mpg).
TTL
You can select to show gallons (g), liters (l),
or not to show the display. The default set-
ting is gallons (g).
TEMP
You can select to show Fahrenheit (°F), Cel-
sius (°C), or not to show the display. The
default setting is Fahrenheit (°F).
DPTH
You can select to show feet (F), meters (m),
or not to show the display. The default set-
ting is feet (F).
5. (1 second): To change the dis-
played unit and return to the normal dis-
play.
NOTE:
• When the speedometer unit settings are
changed, the TRIP, FLOW, ECON, TTL,
TEMP, and DPTH unit settings are collec-
tively changed automatically. To change
the settings for each displayed unit indi-
vidually, repeat steps 3 and 4.
• Press the
taneously for 1 second from step 2 to
reset all displayed units to the default set-
tings.
25
and buttons simul-