Total Hour/Trip Hour Display; Cooling Water Pressure Display (Optional: Cooling Water Pressure Sensor Has Been Installed) - Yamaha 6Y8-2819V-00 Owner's Manual

Total hour/Trip hour display/Cooling water pressure display

Total hour/Trip hour display

The total hour display shows the total hours
of engine operation and the trip hour display
shows the trip hours (T).
: Press to switch between the display
formats.
Total hour
Trip hour (T)
Blinks
Blinks
+ (1 second): To reset the trip
hours (T).
NOTE:
The total hours of engine operation cannot
be reset.
Cooling water pressure display
(optional: cooling water pressure sensor
has been installed)
The cooling water pressure indicator (
comes on and the cooling water pressure is
shown in 6 levels.
Blinks
CAUTION:
• When the cooling water pressure
decreases to 10 psi or less, turn the
engine off and check the cooling water
inlet for clogs.
• If you cannot locate and correct the
cause, consult a Yamaha dealer.
NOTE:
The cooling water pressure level display
shows "L" for low and "H" for high.
7
10 psi
)