N
2.
Disconnect the fuel line from the out-
board motor.
3.
Place the tilt lock lever (if equipped) in
the release/up position.
4.
Pull up the shallow water lever (if
equipped).
5.
Hold the rear of the top cowling with one
hand and tilt the engine up fully.
6.
Push the tilt support knob into the clamp
bracket. Or the tilt support bar will turn to
the lock position automatically.
ZMU04881
EMU28005
Procedure for tilting up
Power trim and tilt models / power tilt models
1.
Place the remote control lever / the gear
shift lever in neutral.
ZMU02042
ZMU02044
2.
Disconnect the fuel line from the out-
board motor or close the fuel cock.
Operation
ZMU02078
N
ZMU01988
42