c
S
hanGinG the
ettinGS
Map Data
Fields—customize the width and contents of the data fields displayed on the map page. Normal is the
default setting. Press
Menu
➊
.Select.Thin.or.Wide..
Select.Next.
➍
.Select.the.type.of.data.
you.want.to.see.
3
three times. Then select
➋
.Select.the.type.of.data.
fields to customize.
➎
Select the data field
layout..Select.OK.
Map
>
>
Map Data
➌
Select a data field you
want.to.change.
➏
Repeat for each field.
Then.select.Finish.
Fields.
1/2, 2/2, 1/3?
1/2 indicates this
is your first choice
out of two choices
for the layout of
the data field. 2/2
means this is your
second choice.
Some types of data
fields allow you
three choices, but
some only provide
one.
GVN 53 Owner's Manual