Configuring Video.output - Garmin GVN 53 Owner's Manual

a
PPendiX
Finding Custom POIs
To view a list of the custom POIs loaded in your
navigation system, select
poIs.
Adjusting the Proximity Alerts
To turn on or off the proximity alerts for custom POIs,
press the Menu button three times and select
proximity Alerts.
Audio Notification—turn off or on the alerts that sound
as you approach a custom POI.
Visual Notification—turn off or on the pop-up alerts
that appear as you approach a custom POI.

tools My Data Custom
> >
General
Continuous Notification—select which alerts (which
types of POIs) you want to be continually notified of.
Deleting All Custom POIs
To delete all custom POIs from your navigation system,
press the Menu button twice and select
Custom poIs Delete
>
>
Configuring Video Output
On some versions of the GVN 53, you can switch the
composite video output mode from NTSC (National
Television System Committee) to PAL (Phase Alternate
Line, available in Europe only) by using the switch
beside the SD card slot. Push the switch all the way to
the right to change the composite video mode to PAL.
notE: ntSC is the default setting. Use NTSC
unless your system works exclusively with PAL.
After you change the composite video mode, you must
turn off your vehicle and turn it back on again to reboot
My Data
All. Select Yes
to confirm.
GVN 53 Owner's Manual
>