Treatment Of Submerged Motor; Procedure - Yamaha 150 Owner's Manual

unless the oil level warning indicators
are working.
1. Remove the top cowling.
2. Turn on the main switch.
OFF
3. Lift the emergency switch to pump re-
serve oil into the engine oil tank from the
remote oil tank.
1. Emergency switch
1
1. Engine oil tank
ON START
ZMU01906
1
ZMU03925
2
ZMU01908
Trouble Recovery
2. Remote oil tank
4. After using the emergency switch, turn
off the main switch, then turn it back on.
This resets the warning system to nor-
mal operation. The yellow segment will
continue to be displayed on the oil level
indicator.
5. Start the engine and return to the near-
est port for more oil.
NOTE:
The maximum reserve oil capacity is 1500
G
3
cm (1.6 US qt, 1.31 Imp qt).
The oil-feed pump will not operate if the
G
engine is tilted up more than 35°. Put the
engine in the upright position (not tilted)
before using the emergency switch.
EMU29760

Treatment of submerged motor

If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately.
If you cannot immediately take the outboard
motor to a Yamaha dealer, follow the proce-
dure below in order to minimize engine dam-
age.
EMU29771

Procedure

1. Thoroughly wash away mud, salt, sea-
weed, and so on, with fresh water.
ZMU01909
66