Maintenance Chart - Yamaha 150 Owner's Manual

EMU28522

Maintenance chart

Frequency of maintenance operations may be adjusted according to the operating condi-
tions, but the following table gives general guidelines. Refer to the sections in this chapter for
explanations of each owner-specific action.
NOTE:
When operating in salt water, turbid or muddy water, the engine should be flushed with clean
water after each use.
The " " symbol indicates the check-ups which you may carry out yourself.
The " " symbol indicates work to be carried out by your Yamaha dealer.
Item
Anode(s) (external)
Anode(s) (internal)
Battery
Cooling water pas-
sages
Cowling clamp
Fuel filter (can be dis-
assembled)
Fuel system
Gear oil
Greasing points
Idling speed (carbure-
tor models)
PCV (Pressure Con-
trol Valve)
Power trim and tilt unit
Propeller and cotter pin
Shift link / shift cable
Thermostat
Throttle link / throttle
cable / throttle pick-up
timing
Actions
Inspection / replace-
ment
Inspection / replace-
ment
Inspection / charging
Cleaning
Inspection
Inspection / cleaning
Inspection
Change
Greasing
Inspection
Inspection
Inspection
Inspection / replace-
ment
Inspection / adjustment
Inspection / replace-
ment
Inspection / adjustment
Initial
50 hours
10 hours
(3
(1 month)
months)
Maintenance
Every
100 200
hours (6 hours (1
months) year)
46