10. Follow the on-screen instructions to install the rest of your software.
When installation is complete, remove the CD.
To set up additional computers to print to the NX420 Series, see "Setting up
Additional Computers" on page 14.
Setting Up With the Printer Buttons
1. Follow the instructions on the screen to start the printer's wireless Setup
Wizard.
2. When you see this screen, use the printer's buttons to select the name of your
wireless network, then press x
If your network name isn't listed, try the following:
■
Make sure that your wireless router or access point is turned on and
working correctly. Press the
the previous screen, press x
step 2.
■
If you still can't find the network name in the list, your router or access
point is not broadcasting its network name. Press l or r to select
SSIDs
SSID Manually" on page 13.
10
Wireless Network Setup
, then press x
Start
.
Start
Stop/Clear Settings
y
to select
Start
Setup Wizard
. Continue with the steps in "Entering Your
button to return to
, then repeat
Other