Insert The Battery; Getting Started; Playing A Dvd Or Video Cd(Operation) - Denver MTW-735 TWIN User Manual

Identification of Controls

Insert the battery

1.Open the battery door.
1
N
Notes:
Remove battery during storage or when you are not using the DVD
player for a long time.

Getting Started

Playing a DVD or Video CD(Operation)

Playback Setup
1. turn on the power switch at the left side of the product.
2. Press OPEN to open the disc tray and insert your chosen
disc in the tray, with the playback side down.
3. Close the tray. Playback will start automatically.
DVD
Use the buttons to select the title/chapter you want to
view, then press ENTER to start.Press MENU to return to the
menu screen.
VCD
Use the number buttons to select the track you want to view and
press MENU to return to the menu screen. Menu settings and
operating procedures may differ.Follow the instructions on the
each menu screen.
2.Insert two AAA size batteries.
2
N
Notes:
1.If parental control is set and the disc isn ' t fit for the rating
setting you must input the password.(See "parental" on page 22).
2.DVDs may have a region code.Your player does not play
discs that have a region code different from your player.
3.Unless stated otherwise,all operations described use the
remote control.Some features may also be available on the
setup menu.
Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a disc has
more than one track, you can move to another chapter/track as
follows:
1.Press SKIP or briefly during playback to select the next
(or previous)chapter/track or to return to the beginning of the current
chapter/track.
Most of the functions can be controlled by remote control unit. Most of the functions can be controlled by remote control unit. Most of the functions can be controlled by remote control unit. Most of the functions can be controlled by remote control unit.
2.Press SKIP twice briefly to step back to the previous
chapter/track.
3.To go directly to any chapter during DVD playback, input the
chapter/track number .
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a different audio
channel (Stereo, Left, or Right).
DVD VCD
Repeat A-B
To repeat a sequence.
1. Press A-B at your chosen starting point "
briefly on the TV screen.
2. Press A-B again at your chosen end point."
briefly on the TV screen and the repeat sequence begins.
3. Press A-B again to cancel.
DVD VCD
Repeat
You can play a title/chapter/all/track on a disc repeatedly.
Press REPEAT during playback to select a desired repeat mode.
DVD VCD
VCD
A". Appears
AB" appears
6