General Setup Page - Denver MTW-735 TWIN User Manual

SETUP Menu Setting
General Operation&General Setup Page
Dolby

- - GENERAL SETUP PAGE - -

TV DISPLAY Wide 4:3 PANSCAN
ANGLE MARK OFF 4:3 LETTERBOX
OSD LANGUAGE ENG 16:9
CLOSED CAPTIONS ON
SCREEN SAVER ON
SET TV DISPLAY MODE
1.Press to highlight 'TV Display'.
2.Enter its submenu by pressing
3.Move the cursor by pressing
16:9
Wide
4:3
Letter Box
4:3
Pan Scan
Normal/PS
If you have a normal TV and want both sides of the picture to be
trimmed or formatted to fit your TV screen.
Normal/LB
If you have a normal TV. In this case , a wide picture with black
bands on the upper and lower portions of the TV screen will be
displayed.
Wide
If you have a wide-screen TV.
.
to highlight the selected item.
General Setup Page
Angle Mark
Displays current angle setting information on the right hand corner
of the TFT screen if available on the disc.
Dolby
- - GENERAL SETUP PAGE - -
TV DISPLAY Wide
ANGLE MARK OFF
OSD LANGUAGE ENG OFF
CLOSED CAPTIONS ON
SCREEN SAVER ON
SET ANGLE MARK
1.Press to highlight 'Angle Mark'.
2.Enter its submenu by pressing
3.Move the cursor by pressing
On:Enable Angle Mark.
Off:Disable the current angle setting display.
OSD Lang
You can select your own preferred language seetings.This DVD
system will automatically switch to the selected language whenever
you load a disc.If the language selected is not available on the disc,
the disc's default language will be used instead. The OSD language
in the system menu will remain once selected.
ON
.
to highlight the selected item.
12