Table of Contents
Advertisement
SETUP Menu Setting
General Operation&General Setup Page
General Operation
1.Press SETUP to enter the Setup Menu.
2.Press ENTER to
enter
the next level submenu or confirm your
selection.
3.Press
to enter the submenu or returen to the previous menu
4.Press
to highlight the desired menu.
To exit from the menu
Press SETUP
The settings will be stored in the player's memory
even if the player is switched off.
General Setup Page
- - GENERALSETUP PAGE - -
TV DISPLAY
WIDE
ANGLE MARK
ON
OSD LANGUAGE
ENG
CLOSED CAPTIONS
ON
ON
SCREEN SAVER
ON
ON
OFF
OFF
GOTO GENERAL SETUP PAGE
TV Display
Set the aspect ratio of the DVD Player according to the TV you have
connected.
Normal/PS
If you have a normal TV and want both sides of the picture to be
trimmed or formatted to fit your TV screen.
Normal/LB
If you have a normal TV. In this case , a wide picture with black
bands on the upper and lower portions of the TV screen will be
displayed.
Wide
If you have a wide-screen TV.
Angle Mark
Displays current angle setting information on the right hand corner
of the TFT screen if available on the disc.
OSD Lang
You can select your own preferred language seetings.
5
4:3 PANSCAN
4:3 LETTERBOX
ON
ENGLISH
OFF
16:9
FRENCH
WIDE SQUEEZE
GERMAN
ITALIAN
SPANISH
PORTUGUESE
Closed Captions
Closed captions are data that are hidden in the video signal of some
discs.Captions are different from subtitles because captions
are impaired by showing the sound effects(e.g.,"phone ringing" and
" footsteps"),while subtitles do not.
Before you select this function,please ensure that the disc contains
closed captions information and your TV set also has this function.
Screen Saver
This function is used to turn the screen saver On or Off.
Downmix
This options allows you to set the stereo analog output of your
DVD Player.
Audio Setup Page
Audio Setup Page
- -
--
--
- -
AUDIO SETUP PAGE
DOWNMINX
STR
DIGITAL OUTPUT
RAW
DOLBY DIGITAL
DUAL MONO
DYNAMIC
GO TO AUDIO SETUP PAGE
Downmix
This options allows you to set the stereo analog output of your
DVD Player.
LT/RT :Select this option if your DVD Player is connected to a
Dolby Pro Logic decoder.
Stereo :Select this option when output delivers sound from only
the two front speakers.
SPDIF Output
The function is used to select the SPDIF Output:SPDIF Off,SPDIF/
RAW,SPDIF/PCM.
SPDIF Off: Turns off the SPDIF output.
SPDIF/RAW: If you have connected your DIGITAL AUDIO OUT
to a multi-channel decoder/receiver.
SPDIF/PCM: Only if your receiver is not capable of decoding
multi-channel audio.
hearing
LT/RT
SPDIF/OFF
STEREO
SPDIF/RAW
STR
STR
SPDIF/PCM
L-MONO
- -
- -
R-MONO
FULL
MIX-MONO
- -
- -
- -
- -
- -
- -
-
-
-
OFF
Advertisement
Table of Contents
