Powering And Installation; Connecting To The Monitor - Denver MTW-728 TWIN Instruction Manual

Powering and installation

Plug one end of the AC/DC power adaptor into the DC IN 9V jack on the right of the
machine,then plug the other end into the AC power receptacle.Please refer to the
following illustration.
AV IN/OUT
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9Vjack on the unit,plug the
other end into the car cigarette lighter socket.See illustration below.
AV IN/OUT
Note
Car cigarette lighter adaptor can't be used to recharge the battery.
Car cigarette lighter adaptor is available to use only when the car
power supply is 9-12V.
DC IN 9V
DC OUT
DC IN 9V
DC OUT
6
Connecting to the monitor
The unit can also be connected to the external LCD monitor.
Connect the unit to power by AC/DC adapter or cigarette lighter adapter.
Then connect the unit DC OUT jack to DC IN 9V Jack of the LCD Monitor by a DC/AV
cable. Also use this DC/AV cable to connect the AV IN/OUT jack of the
unit to AV IN jack of the Monitor.
Please refer to the illustration below.
AV IN/OUT
DC IN 9V
DC OUT
ON/OFF
7