Epson ARTISAN 725 Quick Manual page 41

Setting Up With the Control Panel
If you are using Mac OS X 10.6, or you did not connect a USB cable to set up the
product on your wireless network, follow these steps to set it up using the product
control panel:
1. Follow the instructions on the screen to start the product's wireless Setup
Wizard.
2. When you see this screen, use the product's buttons to select the name of your
wireless network, then press
If your network name isn't listed, try the following:
■
Make sure that your wireless router or access point is turned on and
working correctly. Press
Setup Wizard
■
If you still can't find the network name in the list, your router or access
point is not broadcasting its network name. Press
"Entering Your SSID Manually" on page 43.
. When you're finished, click
OK
to return to the previous screen, select
Back
y
, then repeat step 2.
.
Next
, then see
Back
y
Wireless Network Setup
41