Download
Share
Print this page
Epson Artisan 730 Quick Setup Instructions
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. All in One Printer
  5. Artisan 730
  6. Quick setup instructions
Epson Artisan 730 Quick Setup Instructions

Epson Artisan 730 Quick Setup Instructions

C11cb18201 all-in-one printer
Hide thumbs Also See for Artisan 730:
1
2
3
4

Advertisement

Quick Links

See also: Service Manual , Quick Manual
Enlarged version
Artisan
730
®
Start Here
Read these instructions before using your product.
1
Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials from the printer, including
from inside the paper cassette.
1
R aise the scanner unit and remove the transportation lock.
Store the transportation lock as shown.
2
Lower the scanner unit.
2
Turn on and adjust
1
C onnect the power cord to the back of the printer and to
an electrical outlet.
Caution: Do not connect to your computer yet.
*412184400*
*412184400*
French control panel stickers
(for Canada only)
2
On button, then adjust the control panel.
P ress the
3
Select language
Press or to select your language, then press OK.
Note: You can change the language using the product's control
panel. For more information, see the online User's Guide.
4
Install ink cartridges
1
L ift up the scanner unit.
2
Unpack the ink cartridges.
3
Remove only the yellow tape from each cartridge.
C
aution: Don't remove any other seals or the cartridges may
leak.
4
I nsert the cartridges in the holder for each color. Press
each cartridge down until it clicks.

Advertisement

loading

Related Manuals for Epson Artisan 730

Summary of Contents for Epson Artisan 730

  • Page 1: Install Ink Cartridges

    Artisan ® Start Here Read these instructions before using your product. Unpack Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials from the printer, including from inside the paper cassette. R aise the scanner unit and remove the transportation lock. Store the transportation lock as shown. Lower the scanner unit. Turn on and adjust C onnect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. *412184400* *412184400* Press or to select your language, then press OK. French control panel stickers (for Canada only) Note: You can change the language using the product’s control panel. For more information, see the online User’s Guide. On button, then adjust the control panel.

  • Page 2: Load Paper

    Lower the scanner unit. W ait while the printer is priming, which takes about 7 minutes. N ote: Your printer ships with full cartridges and part of the ink from the first cartridges is used for priming the printer. Replacement cartridges will print more pages. aution: Don’t turn off the printer while it is priming or you’ll waste ink. W hen you see this menu on your product’s LCD screen, do not make a selection yet. Continue with the instructions in the following sections to load paper in your product and install software. Load paper The paper cassette has 2 trays. The main tray is for letter-size, A4, legal-size, or 8 10-inch paper. The photo tray is for 4 6- or 5 7-inch photo paper. For instructions on loading legal-size paper, see the online User’s Guide. O pen the front cover (if it’s not open already). P ull out the paper cassette at the bottom of the printer. Then slide back the photo tray and lift it up. S queeze the edge guides and slide them out. Then insert paper with the glossy or printable side facedown. S lide the edge guides against the paper, but not too tight. Make sure the paper is under the tabs on the edge guides.

  • Page 3: Wireless Connection

    Install software Note: If your computer does not have a CD/DVD drive, you can download the software from the Epson website (see “Epson technical support”). Caution: Be sure to close your other programs, including any screen savers and virus protection software, before beginning this software installation. M ake sure the printer is NOT CONNECTED to your computer. Windows : If you see a Found New Hardware screen, click ® Cancel and disconnect the USB cable. You can’t install your software that way. Insert the product CD. W indows: If you see the AutoPlay window, click Run Setup.exe. If you see the User Account Control screen, click Yes or Continue. Mac OS X: Double-click the ® C lick Install (Windows) or Continue (Mac OS X) and follow the instructions on your computer screen. W hen you see the Select Your Connection screen, check the “Connection options” section on this sheet for more information. Then click Next (Windows) or Continue (Mac OS X) and follow the instructions on your computer screen. Connection options Wireless connection You must install the software on every computer from which you want to print. For the first installation, we recommend using a temporary USB connection to simplify wireless setup.

  • Page 4: Genuine Epson Paper

    Any questions? Quick Guide Basic steps for copying, printing, and scanning. On-screen help with your software Select or when you’re using your software. Help User’s Guide Click the icon on your desktop (or in the Applications/Epson Software/Guide folder on Mac OS X) to access the online User’s Guide, software downloads, Epson Supplies Central and more (requires an Internet connection). If you don’t have a User’s Guide icon, you can install it from the CD or go to the Epson website, as described below. Epson technical support Visit epson.com/support (U.S.) or epson.ca/support (Canada) where you can download drivers, view manuals, get FAQs, or e-mail Epson. To speak with a support specialist, call: U.S.: (562) 276-4382, 6 to 8 , Pacific Time, Monday through Friday, and 7 to 4 , Saturday. Canada: (905) 709-3839, 6 to 8 through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.