Ring Down / Hot Line / Off-Hook Preference - STARPLUS Triad XTS User Manual

Ring Down / Hot Line / Off-Hook Preference

SINGLE LINE TELEPHONE
Not applicable
Ring Down / Hot Line / Off-Hook
Preference
If your phone has been programmed for Off-Hook Preference,
you can access an outside line, or a feature by going off-hook or
pressing the ON/OFF button. It simulates the depression of a
specific button and can be programed by a station user or a
database administration programmer using code [691] + the
button number.
While Off-Hook Preference is enabled, you may access
internal intercom dial tone as follows:
1. Press the preprogrammed ICM button,
-or-
Dial your intercom number. (Do not lift handset or press
ON/OFF button before dialing intercom number.) LED
lights steady and intercom dial tone sounds.
2. Dial an internal station or feature access code.
Off-Hook Preference Programming (Via a Station)
If your phone is programmed for Off-Hook Preference and you
were given the ability to enable or change the prime flexible
button:
1. Dial [691] on the dial pad.
❑
Flex
Btn
85