Placing An Intercom Call - STARPLUS Triad XTS User Manual

Intercom
To use Intercom Transfer with DSS Buttons:
1. Receive or make an intercom call using a DSS button.
2. Press the TRANS button. Intercom dial tone sounds.
3. Press the DSS button where to transfer the call.
4. Hang up (stations 1 and 2 are connected).

Placing an Intercom Call

To place an Intercom Call:
1. Press the DSS button of the party to be called (if
programmed at your phone),
-or-
Dial the extension number.
(You hear ringing if the called station is in the T answering
mode; or three bursts of tone if called station is in the H or P
position.)
2. Lift handset or use the speakerphone after the tone bursts
stop.
3. Hang up to end the call.
To answer an Intercom Call:
In the T mode (LED On), you hear repeated bursts of
intercom tone ringing and the HOLD button slow flashes.
Lift the handset or press the ON/OFF button to
answer,
-or-
Press the H-T-P button to the H mode to reply.
Dialing a number in the numbering plan activates
the telephone automatically.
61