Call Transfer; Executive/Secretary Transfer - STARPLUS Triad XTS User Manual

38
To use Group Call Pickup:
1. Lift handset or press ON/OFF button.
2. Dial [#0] on the dial pad,
-or-
Press preprogrammed PICKUP button to connect to calling
party.
SINGLE LINE TELEPHONE
To use Group Call Pickup:
1. Lift the handset.
2. Dial [#0]. You will be connected to the incoming intercom
or outside line call.

Call Transfer

Outside lines can be transferred from one phone to another
within the system. The transfer can be either screened
(announced) or unscreened to either an idle or busy station, an
ACD/UCD Group, or a Hunt Group.

Executive/Secretary Transfer

If you are designated the Executive station and your
phone is busy or in DND, all calls will be routed to the
Secretary station.
If you are the designated Secretary station, you can
signal the Executive that is busy or in DND by using the
Camp On feature.
You must be in the same Pickup group as the
ringing telephone to pickup the call.
You MUST have access to the specific outside line
or LOOP button to use Group Call Pickup.
Call Transfer