Table of Contents
Advertisement
Attendant Features
6. Press SPEED when finished. Confirmation tone sounds and
the display updates.
7. Press HOLD, then use [ ] or [#] to scroll to next entry.
-or-
Hang up to end programming.
Attendant Disable Outgoing CO Line
The first Attendant can disable CO lines to prevent outgoing
access to those lines.
To disable CO Lines:
1. Lift handset or press ON/OFF button.
2. Dial [602] on the dial pad. A confirmation tone sounds.
3. Press the line button(s) of the CO Line(s) to disable. A
confirmation tone sounds and the CO Line button(s) LED
flashes.
To reactivate the CO Line(s):
Repeat Steps 1-3 to disable this feature.
Attendant Override
When Attendant Override is enabled, Attendant stations may
override or call stations that are busy or in Do Not Disturb.
To call a station busy on a CO call:
Press the preprogrammed ATTN OVERRIDE button [601].
Three short tone bursts are presented to the called party.
After five (5) seconds, the station's CO line is automatically
placed on hold and the Attendant is cut-through.
To call a station in Do Not Disturb mode:
Press the preprogrammed ATTN OVERRIDE button. The
station is signaled with a Camp On tone.
❑
Flex
Btn
23
Advertisement
Table of Contents
