Loop Key; Mailbox Buttons - STARPLUS Triad XTS User Manual

66

Loop Key

A station not having a direct appearance for a CO line receives
incoming CO calls and transferred CO calls under the LOOP
button. Only one call at a time can be connected to a keyset on
the LOOP button.
To make a Loop button:
1. Press the SPEED button twice.
2. Press the desired flexible button.
3. Dial [89].
4. Press HOLD.

Mailbox Buttons

To program a station's mailbox on a flexible button:
1. Press SPEED twice.
2. Press desired flexible button to be programmed.
3. Dial the mailbox feature access code (460-467 = voice mail
group 1-8; 468 = remote voice mail group).
4. Dial the VMID number. Confirmation tone sounds. If an
error is made during entry, an error tone sounds.
Example -- 4606037 represents a voice mail button (group
1) for VMID 6037 that is in the system with the centralized
voice mail installed.
To use a mailbox button:
The called station presses the MAILBOX flexible button and
goes on-hook. The internal or external call is then
transferred to the VM port by the telephone system.
❑
Flex
Btn
❑
Flex
Btn
Loop Key