Using The Flash - Nikon COOLPIX P7800 Reference Manual

Using the Flash

You can shoot images with a flash by raising the built-in flash. You can set the
flash mode to match the shooting conditions.
1
Lower the K (flash pop-up)
control to raise the flash.
• When the flash is lowered, flash operation
is disabled and S is displayed.
2
Press the multi selector H (m).
3
Select the desired flash mode
(A60) and press the k button.
• When the manual flash is selected, select
the flash output and press the k button.
• If a setting is not applied by pressing the k
button within a few seconds, the selection
will be canceled.
B
Flash Status Display
The status of the flash can be confirmed with
the flash mode icon at the top of the monitor
by pressing the shutter-release button halfway.
• On: The flash fires in accordance with the
flash mode when you press the shutter-
release button all the way down. When U
(auto) is set, the flash fires when W is displayed.
• Flashing: The flash is charging. The camera cannot shoot images.
• Off: The flash does not fire when an image is taken.
Auto
59