Nikon COOLPIX P7800 Reference Manual page 251

Problem
• The ambient light is too bright. Move to a darker
Monitor is hard
• Adjust the monitor brightness.
to see.
• The monitor is dirty. Clean the monitor.
Image in the
Adjust the viewfinder using the diopter adjustment
viewfinder is
control.
difficult to see.
• If the camera clock has not been set, the "Date not
Date and time of
recording are
not correct.
• The camera clock is not as accurate as ordinary
Shooting and photo information may be hidden. After
No information
confirming that the Fn2 button setting is set to Show/
displayed in
hide info, press the w2 button until information is
monitor.
displayed.
Print date not Time zone and date has not been set in the setup
available. menu.
Date not
• The current shooting mode does not support Print
imprinted on
images even
• A function that restricts the print date is enabled.
when Print
• The date cannot be imprinted on movies.
date is enabled.
Screen for
setting time
zone and date is
displayed when
The clock battery is exhausted; all settings were
camera is turned
restored to their default values.
on.
Camera settings
reset.
Cause/Solution
place or use the viewfinder.
set" indicator flashes during shooting and movie
recording. Images and movies saved before the clock
is set are dated "00/00/0000 00:00" or "01/01/2013
00:00" respectively. Set the correct time and date
from the Time zone and date option in the setup
menu.
watches or clocks. Periodically compare the time of
the camera clock with that of a more accurate
timepiece and reset as required.
date.
A
10
99,
E75
F6
10
28, 99,
E73
99,
E73
11, 101,
E92
28, 99,
E73
99,
E77
77
–
28, 29
F9