Controls/Components - Windsor Cadet CDT7IHB Operator Instructions Manual

3
4
1
6
2
CONTROLS/COMPONENT LOCATIONS
5
7
8
CDT7IHB 86036840 03/12/07
1.
Main Handle. Used to pull and maneuver
machine.
2.
Electrical Cord.
3.
Pump Switch. Turns on pump and enables
spray.
4.
Brush/Spray switch. Turns on brush motor
and activates electro-valve to dispense
solution to floor through jets. Intermittent, off,
and continuous settings.
5.
Vacuum Motor Switch. Turns on vacuum
motor
6.
Brush Motor Circuit Breaker. 4 amp.
Breaker protecting brush motor.
7.
Vacuum Motor Circuit Breaker. 7 amp.
Breaker protecting vacuum motor.
8.
Recovery Dump Hose. Facilitates draining
dirty cleaning solution.
9.
Solution Dump Hose. Facilitates draining
excess cleaning solution from solution tank.
9
3-2