Advertisement
For Windows 2000
For Windows 2000, do as follows:
1
Click Start, move the cursor to Settings, and click Control Panel.
2
Double-click System.
3
Click the Hardware tab.
4
Click the Device Manager button.
5
Click IDE ATA/ATATI controller to pull down the submenu.
6
Double-click Secondary IDE.
7
Click the Advanced Settings tab.
8
Select the DMA is available as the Transfer Made.
9
Click OK.
10
Click Close to close the "System Properties" window.
A message appears, informing you that the system settings have changed.
11
Click OK to restart the system.
Installing DVDExpress
To install DVDExpress, do the following:
1
Insert the DVD Software CD-ROM into the DVD drive.
2
Click Start and Run.
3
Type x:\DVDPLAYR\SETUP.EXE and click OK, where x represents the drive
letter of the DVD drive.
4
Follow the instructions on the screen.
Part 1. About the 6X DVD Ultrabay 2000 Drive 1-3
Advertisement
