Table of Contents
Advertisement
!
CAUTION
machine in the upright positions.
The hose handle can be removed from the side of
the vacuum and can be used with or without
attachments. Maintain a grasp on the machine
when using the hose as it can tip if the hose is
pulled too far. The machine can also be used
without a power head or other floor tool. You can
easily carry the machine by using the carrying
handle. When you have finished using the
machine, turn it off by moving the on/off switch into
the off position. Then unplug the cable and wind it
onto the cable hook and handle
FLOOR PREPARATION
1. First, clean your floor with a vacuum cleaner.
Afterwards clean the floor with a detergent
cleaner as per the manufacturers instructions.
2. Once dry, polish the floor with the green Floor
Pad. It is recommended to move the floor
polisher slowly over the floor in a regular
motion and to go in different directions for best
results.
INDICATOR LIGHTS
The green LED light indicates that the polisher is
operational.
The red LED light comes on if the machine has
shut down for safety reasons, for example,
overload or clogging. (See Removing Blockage
section.)
When using the hose and
attachments, keep the
86324160 AXCESS 03/23/09
OPERATION
3-4
Advertisement
Table of Contents
