Assembly; Operating Instructions - Windsor 1.012-063 0 Operating Instructions Manual

Table of Contents

Advertisement

OPERATIONS

ASSEMBLY

Please read all instructions
!
CAUTION
before using this machine.
1. To assemble, carefully attach the polisher
nozzle to the vacuum cleaner through the
fitting at the bottom of the vacuum until it
locks.
2. Push the black end of the hose into the
connection on the filter cover.
3. Insert the hose handle into the suction opening
on the side and press the hose into its place
on the side of the machine.
4. Fit the Floor Pad into the recesses of the pad
retainer located underneath the polisher head.
5. Push the Floor Pad down with one hand
against the resistance of the four spring
loaded ejector pins.
6. Fit the Quick-release disc with the other hand
and turn it clockwise until the lever arms click
into the floor pad.
7. The Quick-release disc is fitted correctly when
its lines and the lines on the floor pad coincide.

OPERATING INSTRUCTIONS

NOTE: Use this Polisher according to the following
instructions.
This Polisher is recommended for the optimal
cleaning of your high-quality, water resistant hard
floors. The rotating design of the swivel neck
allows the suction-polisher to move in any
direction.
1. Ensure that the on / off switch of your Polisher
is in the off position.
2. Release the vacuum cleaner cable completely
and plug it into the wall outlet. Now you can
start the machine by pressing the on / off
switch. This Polisher has a soft-start system
so there may be a slight delay before it
operates.
3. To start, push the foot pedal of the floor
polisher and lower the telescopic tube or
respectively the vacuum cleaner. Failure to
use the foot pedal will cause lasting damage to
the machine. The food pedal locks the swivel
neck in an upright position. In this position the
Polisher automatically turns off. The swivel
neck has an internal lock which will hold the
machine in the central position to avoid
unwanted rotation.
!
CAUTION
After using the polisher hold
the polisher until the floor
pad stops rotating.
3-3
86324160 AXCESS 03/23/09

Advertisement

Table of Contents
loading

This manual is also suitable for:

Axcess 1.012-063.0

Table of Contents