Connecting Tv Using Rca Composite Or S-Video - Entone Amulet 300 User Manual

High definition ip television receiver
Table of Contents

Advertisement

Amulet High Definition IP Television Receiver User's Guide

CONNECTING TV USING RCA COMPOSITE OR S-VIDEO

1. Acquire the required cable. RCA cable comes packaged with the Amulet. S-Video cable is not
packaged with the Amulet. Before purchasing the cable, consult your TV owner's manual to confirm
that your TV supports the video signal output that you plan to use.
2. Connect the video and audio cables to the Amulet.
3. Connect the opposite end of the video and audio cables to the matching input in the TV.
4. Plug in your TV and turn on the power using your TV remote control. Use your TV remote control to
select the respective video input that has connected to the Amulet. Consult your TV owner's manual for
instructions as required.
5. Plug in your Amulet and turn on the power.
6. You should now see the output from the Amulet on your TV screen.
Figure 4-7 Connecting TV using RCA Composite Video/Audio
15
Figure 4-8 Connecting Primary TV using S-Video and Composite
Audio
Copyright  2010 Entone, Inc. All rights reserved
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amulet

Table of Contents