Front Panel And Rear Panel - Entone Amulet 300 User Manual

Amulet High Definition IP Television Receiver User's Guide

FRONT PANEL AND REAR PANEL

Figure 2-1 Amulet Front Panel
Part Name
1. POWER
2. USB
3. LINK Indicator
4. HD Indicator
5. RECORD Indicator
6. MENU
7. Arrow Keys and OK
Button
Figure 2-2 Amulet Rear Panel
Part Name
1. ANTENNA
2. SATA
3. CH4/CH3 Switch
4. REMOTE CONTROL
5. COAX
6. VIDEO Y
7. VIDEO
8. VIDEO P
B
9. AUDIO LEFT
10. VIDEO P
R
11. AUDIO RIGHT
9
If held for less than 5 seconds, turns the Amulet HD TV receiver ON/OFF. Lights blue
when the receiver is turned on.
If held for longer than 5 seconds, the Amulet HD TV receiver will be restarted.
USB connector
Green when Ethernet connection is active
Blue when the output resolution is HD (720p or higher)
Red when PVR (Personal Video Recording) is recording
Display the User Menu
OK Button for triggering remote registration mode
Other usage according to middleware
Connector for wireless antenna (optional)
Connector for connecting external eSATA harddisk drive
Switch for toggling the RF TV default channel (either channel 3 or channel 4)
RF Type-F connector for connecting the RF remote control antenna (optional)
RF Type-F connector for decoder
Component Video output (Y)
Composite video
Component Video output (P
Composite audio output (channel left)
Component Video output (P
Composite audio output (channel right)
Description
Description
)
B
)
R
Copyright  2010 Entone, Inc. All rights reserved
.