Lms Ospf Interface Metric Table - IBM Nways 8260 Manual

Figure 174. LMS OSPF Interface Metric Table
7. If an area is not directly connected to the backbone area, a virtual link will
296
8260 Multiprotocol Intelligent Switching Hub
Config * OSPF Interface Metric Table Module: BladeRunner
System
IP Address Port
9.67.46.17 0
9.67.46.44 0
9.67.46.94 0
Add Entry
Return to the previous screen
This panel allows you to specify the following parameters for each entry:
IP Address
This is the IP address of the interface advertising the metric.
Port
This parameter specifies the port number of this interface.
TOS
This parameter specifies the Type Of Service metric being referenced.
Metric
This parameter specifies the metric of using this Type Of Service on this
interface.
need to be configured from that area s border router to a border router that
connects to the backbone area. This is necessary to restore the continuity of
the backbone.
To define the OSPF virtual links in your OSPF network, select OSPF Virtual
Interface Table from the OSPF Menu . The resulting panel is shown in
Figure 175 on page 297.
Page 1 Time:
TOS Metric
0 10
0 10
0 10
Prev Page Next Page
17:44 11 Jan 95
Exit