IBM Nways 8260 Manual page 24

Additionally, you can order the following features to be included in your 8260:
The 8260 can be managed out-of-band using an ASCII console attached locally or
via modem to the management module. Additionally, you may manage the 8260
via SNMP using the Hub Manager Program for AIX.
The following sections provide an overview of the various components of the
8260.
2
8260 Multiprotocol Intelligent Switching Hub
One power supply
One power supply bay cover
One AC power cord
Three fan units
One cable tray
One rack mount kit
One rubber feet kit
Six blank dual-slot filler plates
Three blank single-slot filler plates
Up to three additional power supplies for 8260 Model 017 and Model 17 A or
up to two additional power supplies for the 8260 Model 010.
8250 adapter kit
Distributed Management Module (DMM)
Ethernet Carrier Distributed Management Module (EC-DMM)
Ethernet Media Access Control (E-MAC) daughter card
Token-ring Media Access Control (T-MAC) daughter card
Ethernet Modules:
8260 Ethernet 24-port 10Base-T module
8260 Ethernet 20-port 10Base-T module
8260 Ethernet 40-port 10Base-T module
8260 Ethernet 10-port 10Base-FB module
8260 Multiprotocol Interconnect module
8260 Ethernet Security daughter card
Token-ring modules:
18 port active per-port switching module
18 port active module-switching module
20 port passive module-switching module
Dual fiber repeater module
Jitter Attenuator daughter card
ATM modules:
ATM Control Point and Switch module
4-port ATM Concentrator module
Note: This book will not discuss the ATM components of the 8260.