Download Print this page

Black & Decker GX302 User Manual

Hover mower
Hide thumbs

Advertisement

English
®
1

Advertisement

loading

  Also See for Black & Decker GX302

  Summary of Contents for Black & Decker GX302

  • Page 1 English ®...
  • Page 2: Know Your Mower

    Use protective equipment. Wear safety maintenance instructions for all of the hover mowers spectacles or goggles whilst operating in the Black & Decker GX302 range. your mower. Use ear protection if the sound level seems uncomfortable when Know your mower using your mower.
  • Page 3: Double Insulation

    ENGLISH • Whenever you leave your mower unattended. • Before checking, cleaning, adjusting or working on your mower. • Before clearing a blockage. • If your mower starts to vibrate • Do not use solvents or cleaning fluids to abnormally (check immediately). clean your mower - use a blunt scraper •...
  • Page 4 Handle assembly (Fig. A - D) Note: Fuses do not give personal protection against electric shock. Remove all the parts from the carton and Plug replacement familiarise yourself with the individual parts of • your mower. Disconnect the plug from the supply. •...
  • Page 5 ENGLISH Ensure that the electrical supply cable is not twisted before you begin to assemble the handle. • Locate the two pins on the switch box (13) with the holes in the upper handle (12). • Fit the retaining plate (23) over the stem •...
  • Page 6 • Place the bulk of the extension cable Note: To obtain the best results cut your on the lawn close to the starting point lawn or grassed area regularly and do not (Fig. Ja position 1). cut when the grass is wet. Your switch box incorporates a cable restraint.
  • Page 7: Overload Protection

    ENGLISH Overload protection Your mower is fitted with overload protection. The reset button (33) can be found on the switch box (Fig. A). If you work too quickly in long grass, or in heavy cutting conditions, you may overload the motor. Fitting a new blade This will be indicated by a significant drop in speed, and eventually the overload protection will operate.
  • Page 8: Fault Finding

    Unwanted products and the Caution: Do not use solvents or cleaning fluids as these may damage the plastic environment components of your mower. Should you find one day that your mower needs replacement, or is of no further Fault finding use to you, think of the protection of the environment.
  • Page 9 Cordless trimsaws Cordless shrubbers Cordless shears Hedgetrimmers EC Declaration of Conformity We declare that unit: GX302 conforms to 89/392/EEC, 89/336/EEC, EN60335, 73/23/EEC, EN55014, EN55104 A weighted sound pressure 96dB (A) A weighted sound power 109dB (A) Hand/arm weighted vibration <2.5m/s...
  • Page 10 Australia Black & Decker (A’asia) Pty Ltd Tel: 03 9213 8200 286-288 Maroondah Highway, North Croydon, Victoria 3136 Fax: 03 9726 7150 New Zealand Black & Decker Tel: 09 579 7600 483 Great South Road, Penrose, Auckland Fax: 09 579 8200 South Africa Black &...
  • Page 12 Part no. 375813-22 10/97.1...
  • Page 13 ® GX302...