Intended use 8. Remove adjusting keys and wrenches Always check that adjusting keys and wrenches are Your Black & Decker strimmer has been designed for trimming removed from the tool before operating the tool. and finishing lawn edges and to cut grass in confined spaces. 9.
Additional safety instructions for batteries and The following symbol is found on the charger: chargers Intended for indoor use only. Batteries Never attempt to open for any reason. Additional safety instructions for grass trimmers Do not expose to water. ...
Never operate the tool with damaged guards or without Insert the charger plug (16) into the charger connector guards in place. (17) at the rear of the tool. Always ensure that the ventilation slots are kept clear of Plug the charger into a mains outlet.
Fitting a new spool of cutting line (fig. G) Switching on Push the lock-off button (2) backward using your thumb Replacement spools of cutting line are available from your and at the same time squeeze the on/off switch (1). Black &...
Remove the spool and unwind the cutting line, then wind it properly. on neatly again as described above. Replace the spool as instructed. Technical data GLC13 GLC14 Protecting the environment Voltage No-load speed 7,500 7,500 Separate collection. This product must not be Weight disposed of with normal household waste.
EC declaration of conformity Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to GLC13/GLC14 date on new products and special offers. Further information Black & Decker declares that these products conform to: on the Black &...
Page 12
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...