Assembling The Hand Blender - KitchenAid 5KHB3583 Manual

oPEraTINg THE HaND BlENDEr

assembling the Hand Blender

Insert blending arm into motor body
1
and twist until it clicks to lock in place.
Mounting
grips
If using a pan guard, place it on a flat
3
surface and position with mounting clips
between the ports of the blade.
Bell guard
Pan guard
10
Port
NoTE: Use the bell
guard to avoid damage to
blade when Hand Blender
is not in use.
Use the pan guard to
avoid damage to cookware
while using Hand Blender.
Before First Use
Before using the Hand Blender for the
first time, wipe the motor body, the
blending arm with blade and the guards
with a clean, damp cloth to remove any
dirt or dust. Mild dish soap may be used.
Do not use abrasive cleansers. Dry
thoroughly with a soft cloth. See "Care
and Cleaning" section for more information.
Remove the bell guard from the blade.
2
Snap pan guard into place with an even,
4
downward motion.
Slide the charged battery into the top
5
of the Hand Blender motor body. Make
sure it latches securely.