Assembling The Hand Blender - KitchenAid 5KHB3581 Instructions Manual

oPEraTINg THE HaND BlENDEr

assembling the Hand Blender

NoTE: Do not put whisk adapter or chopper adapter in dishwasher.
Insert blending arm into bell blade (see
1
"Attachment guide"). Twist to lock until
it clicks.
Insert blending arm into motor body
3
and twist until it clicks to lock in place.
Bell guard
12
Use the bell guard to
avoid damage to blade
when Hand Blender is
not in use.
Before First Use
Before using the Hand Blender for the
first time, wipe the motor body, the whisk
adapter, and chopper adapter with a clean,
damp cloth to remove any dirt or dust.
Mild dish soap may be used. Do not use
abrasive cleansers. Dry thoroughly with a
soft cloth. Wash all accessories, see "Care
and Cleaning" section for more information.
Remove the bell guard from the blade.
2
Mounting
grips
If using a pan guard, place it on a flat
4
surface and position with mounting clips
between the ports of the blade.
Use the pan guard to
avoid damage to cookware
while using Hand Blender.
Pan guard
Port