Rega Brio Integrated Amplifier Owner's Manual page 7

Brio Manual.qxd 28/05/2002 09:57
(Power on, sound from one speaker only)
Are the connections between
the speakers and the amplifier
secure and functioning
correctly?
YES
Are both channels of
the speaker connected
and working properly?
YES
Are the cartridge
connections at the head
shell functioning? Check
cartridge tags
The speaker is
YES
at fault
Contact your Rega Dealer
9
Page 12
Troubleshooting
Correct the fault by plugging
NO
them in. If the wires are loose or
not correctly soldered, contact your
Rega dealer
Check the source
component for faults. Swap
NO
the output leads and check to
see if the fault swaps over
NO
There may be a fault in the
amplifier/speaker chain. Swap
speaker cables. Does the fault
swap channels?
NO YES
The amplifier or speaker
cables are at fault
YES
The
source is at
fault
Troubleshooting
(Loud hum through both speakers when 'Phono' is selected)
Is the amplifier
situated directly below
the cartridge?
NO
Are there other pieces of
HI-FI equipment close to
turntable or amplifier?
NO
Contact your Rega Dealer
YES
Correct the
fault
YES
10