Rear Panel - Pace RNG150N User Manual

REAR PANEL

CABLE IN VIDEO OUT
From cable Composite video
service-provider output
ETHERNET
For use in home
networks
COMPONENT VIDEO
Component video output
for analog HDTV
CABLE IN
ETHERNET
VIDEO OUT
AUDIO OUT
DIGITAL AUDIO OUT (electrical)
S-VIDEO
HDMI
(High Definition Multimedia
Interface)
USB
(Universal Serial Bus) port
IR RECEIVE
DC IN +12V
COMPONENT VIDEO
DIGITAL AUDIO OUT (optical)
TO TV
eSATA
DIGITAL AUDIO OUT
Electrical S/PDIF
audio output
AUDIO OUT
Audio outputs
(stereo, R and L)
DIGITAL AUDIO OUT
Optical S/PDIF
audio output
Connect the cable service here.
For use in home networks.
Connect to the composite video input on your VCR (or a standard TV).
Connect to the L and R audio inputs on your stereo TV, stereo VCR, or optional stereo amplifier.
Connect to the electrical digital audio input on optional digital audio equipment, such as an audio decoder or
home theater receiver.
Connect to the S-video input (if present) on your VCR or TV.
If your HDTV has an HDMI, connect it here for a digital audio/video connection (instead of using the AUDIO
and three analog COMPONENT VIDEO connectors).
Connect to compatible optional equipment that supports a USB 2.0 interface (future use)
Connect to an optional remote "eye".
Connect your set-top's power supply unit here. Make this connection last of all.
If your HDTV does not have an HDMI, connect your HDTV here.
Connect to the optical digital audio input on optional digital audio equipment.
Connect to the RF/antenna input on your TV or VCR (optional).
Connect to an optional external hard disk (if this feature is enabled by your cable service-provider).
RNG150N / RNG200N USER GUIDE (501-3339201) B949/B950
HDMI
®
Video and audio output for
digital HDTV
S-VIDEO USB (Universal
Serial Bus) port
S-video output
For future use
TO TV
RF output to TV
(or VCR)
IR RECEIVE
Infra-red input from a
remote "eye"
DC IN +12V
power input
(Make this connection
last of all)
eSATA
For connection to an
external hard disk
.
6