Rear Panel - Pace XG1-P User Manual

REAR PANEL

To TV
Cable In
RF output to
From cable
service-provider TV (or VCR)
Video Out
Composite video
output for SDTV
*
Not present on PX001BNM
Note also that the funtionality of some of the connectors depends on the cable service provider.
Cable In
To TV
Comp Out*
Video Out
Audio Out
Digital Audio Out:
Electrical* and Optical
HDMI HD To TV
HDMI Input 1 and
HDMI Input 2
USB
eSATA
Ethernet
1394*
+12V DC In Power
CableCARD module
Comp Out* Audio Out
Component video output Audio outputs
for analog HDTV (stereo, L and R)
Digital Audio Out
Electrical (coaxial)*
and optical S/PDIF
audio output
Connect the cable service here.
Connect to the RF/antenna input on your TV or VCR (optional).
If your HDTV does not have an
Connect to the composite video input on your VCR (or a standard TV).
For future use during servicing of your set-top box.
Connect the lower socket to the optical digital audio input on optional digital audio equipment, such as an audio
decoder or home theater receiver. Or connect the upper socket to the electrical digital audio input on optional digital
audio equipment, such as an audio decoder or home theater receiver.
If your HDTV has an connector, connect it here for a digital audio/video connection (instead of using the audio
HDMI
and three analog component video (YPbPr) connectors).
Connect another optional
HDMI
Connect to the L and R audio inputs on your stereo TV, stereo VCR, or optional stereo amplifier.
Connect an optional external hard disk.
Connect your set-top box into an Ethernet home network (optional).
Connect to a TV with a 1394 port or to any other 1394-compatible device.
Connect your set-top box's power supply unit here. Make this connection last of all.
Removal will interrupt your service.
XG1-P (PX001BNT and PX001BNM) USER GUIDE DRAFT (501-100190x)
HDMI Input 1 & 2
HDMI ® video and
audio inputs
HDMI HD To TV eSATA
HDMI video and For connection
audio outputs to an optional
external hard disk
connector, but has component video (YPbPr) inputs, connect your HDTV here.
HDMI
devices (allowing the devices' outputs to loop through the set-top box to the TV).
1394*
USB
For connection to
For connection
to USB device a 1394-compatible
device
Ethernet CableCARD™ module
For connection to (behind cover) Removal
will interrupt your service
a home network
Power
(Make this
connection
last of all)
6