Pace RNG110 Quick Start Quide

WELCOME
Connecting your RNG110
1 Decide which connections work best with your equipment.
Depending on the type of TV and other equipment you have, choose the
connections that will provide the best quality video and audio. Refer to your
equipment user manuals and the tables provided in this guide.
2. Connect your RNG110 to your cable service.
Connect the cable from your cable wall outlet to the CABLE IN
connector on the rear panel of your RNG110.
3. Connect the RNG110 to your TV and other equipment.
Once you have decided which audio and video connections you need to
make, refer to the illustrations in this guide to connect your RNG110 to your
TV and other A/V equipment.
4. Turn on your RNG110.
Plug the 5-volt cord from the power supply unit into the power input socket
(labelled DC IN +5V) on the rear panel of your RNG110, then plug the
power supply unit into the wall AC outlet using the power cord supplied.
Press the POWER button on your remote control - the RNG110 will turn on.
5. Enjoy digital TV!
Use the Pace User Settings menu (see below) to fine-tune your setup. Any
problems? Refer to the Troubleshooting section of this guide and to your
equipment user manuals.
For further information on setting up and operating your set-top, refer to the
RNG110 Operator' s Manual, available at www.pace.com/americas/support
SET-TOP SETUP
You can use the PACE USER SETTINGS menu to change your
set-top's setup.
The settings you can change are in the table, shown right.
1. Make sure your set-top is turned on (the POWER light is green).
2. Press the POWER button on your remote control, then press the Menu
button. The PACE USER SETTINGS menu is displayed on your screen.
3. Use the L, R, U, and D buttons to navigate the menus and the
OK/Select button to confirm your choices. See the example below.
4. Press POWER to remove the menu and return to normal viewing.
PACE USER SETTINGS TV Aspect Ratio
OK
4:3
Select
TV Aspect Ratio
>16:9
TV Display Capability
Auto Pillarbox
Closed Captions
Front Panel Settings
HDMI Settings
Restore Defaults
TV Aspect Ratio
OK OK
> 4:3
Select Select
Select[OK] Exit[POWER]
16:9
IMPORTANT SAFETY INSTRUCTIONS
Before you install or use the apparatus, you must read and understand
these Important Safety Instructions. At all times when using the apparatus
you must follow these Important Safety Instructions to reduce the risk of
fire, electrical shock and injury to persons.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into the outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Additional safety information
• To disconnect power from the set-top, always remove its power supply unit from the AC
mains supply (rather than disconnect the 5 volt cord from the set-top). Therefore you
must install your set-top near to the wall AC outlet, which should be easily accessible.
• Do not perform any servicing unless you are qualified to do so by the manufacturer. Refer
all servicing to qualified service personnel. Servicing the set-top yourself will invalidate the
warranty.
• Maintain a minimum distance of three inches around your set-top for sufficient ventilation.
• To reduce the risk of fire or electric shock, do not expose this set-top to rain or moisture.
• The model number, serial number and electrical rating of your set-top are on a label on its
base.
PACE USER SETTINGS MENU
Menu item Description
TV Aspect Ratio Choose your TV screen' s shape
TV Display Choose the screen resolutions your TV is
Capability capable of displaying
If your 16:9 TV doesn't automatically detect
programs transmitted in 4:3, choose to
Auto Pillarbox
have black bars added to the sides of 4:3
programs
Choose to display subtitles and alerts on
Closed Captions
your TV screen
Front Panel Set the brightness level of the front-panel
Settings lights (but not the POWER light)
Choose an Audio Output Mode, and to
enable or disable automatic detection of
HDMI Settings
OK
a newly connected HDTV (when using an
Select
HDMI cable)
Restore the user settings to their factory
Restore Defaults
defaults
*Factory default settings shown in bold.
This guide describes some on-screen displays such as menus. These may change in the future.
Please check www.pace.com/americas/support for the latest version of the Operator's Manual.
RNG110
High-definition digital set-top
Quick Start Guide
Options*
4:3 or 16:9
1080i, 720p, 480p, 480i,
1080p24 Pass, and/or
1080p30 Pass
Yes or No
On or Off, and Configure Captions
Standby Brightness: Low, Std, or
High
Viewing Brightness: Low, Std, or
High
Audio Output Mode: Auto,
L-PCM, or Pass Through
Disable Auto Detect: Yes or No
-
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and
other limited pay-per-view uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Open Source Licenses
The software contained in this product may be covered by certain components consisting of free software or open source
software. A list of these components and a copy of the relevant copyright notices and license term notices that are
required by such licenses are available at this web page:
http://www.pace.com/opensource/license
Other trademarks listed herein are the property of their respective owners.
© 2009 Pace plc.
All rights reserved.
Pace and are trade marks and/or registered trade marks of Pace plc.
Standard-definition video connections (SDTV)
Video
quality
Standard
High-definition video connections (HDTV)
Video
quality
Top
Superior
High
Alternate audio connections
Audio
quality
Top
High
BRINGING TECHNOLOGY HOME
www.pace.com
TROUBLESHOOTING
Check
Is anything lighted on
your set-top's front
panel?
D
YES
Does your remote
control operate your
set-top?
D
YES
Can you see a picture
on your TV screen?
D
YES
Is the picture distorted
or too small?
D
NO
Can you display
menus and guides on
the screen?
504-3438000
TV video RNG110 video Includes
input output audio?
Composite Video VIDEO OUT No
RNG110 video Includes
TV video input
output audio?
HDMI HDMI Yes
TM
DVI HDMI No
IEEE-1394 1394 Yes
Component (YPbPr) COMPONENT VIDEO No
Audio connections
OPTICAL AUDIO OUT (S/PDIF)
AUDIO OUT (stereo L and R)
Suggested Further checks, if there is
solution still a problem
R
NO Press the POWER Make sure that the power supply unit is
button on your remote properly plugged in.
control to turn on your
If there is a switch by the wall AC outlet,
set-top.
switch it ON.
Check that the wall AC outlet is working.
R
NO Check if the POWER Check that nothing is blocking the path
light on the front panel from your remote control to the front
is green. If it is not, panel.
press POWER on your
Check that your remote control is working
remote control to turn
and is set to operate your set-top.
on your set-top.
If your remote control will still not operate
your set-top, replace the batteries in your
remote control.
R Check that your TV Check that you have selected the
NO
and other equipment appropriate A/V input on your TV.
are plugged in and
If you are using the HDMI connection,
turned on.
make sure it goes directly from your
set-top to your TV. Try disconnecting and
reconnecting the HDMI cable.
Make sure the set-top's TV Display
Capability settings are appropriate for
your TV. Press the ZOOM button (could
be labelled ASPECT) until a picture
appears.
R Check that the TV If your TV is a 16:9 TV, you can use Auto
YES
Aspect Ratio and TV Pillarbox to add black borders to 4:3
Display Capability, as transmissions, so that the picture is not
set on your set-top, stretched.
are appropriate for
If the set-top's settings are correct, try
your TV.
adjusting your TV's display.
R If your TV is connected Change the TV Display Capability
NO
to the VIDEO OUT jack, resolution settings if necessary.
you will see menus
and guides only if the
resolution 480i is set
to "Yes" and all others
are set to "No".