Rear Panel - Pace PX022ANx User Manual

REAR PANEL

Cable In
From cable
service-provider
Cable Out
RF output to
TV (or VCR)
Cable In
Cable Out
Ethernet
Audio Out
SD Video Out
Digital Audio Out
HDMI In
HDMI Out To TV
USB
Power
CableCARD Module
HDMI In
Ethernet
HDMI
For connection to
audio input
a home network
SD Video Out
Composite video
output for SDTV
CC S/N: XXXXXXXXXXXX
CC UA: XXX XXXXX XXXXX XXX
Digital Audio Out
Audio Out
Optical S/PDIF audio
Audio outputs
(stereo, L and R) output
Connect the cable service here.
Connect to the RF/antenna input on your TV or VCR (optional).
Connect your set-top box into an Ethernet home network (optional).
Connect to the L and R audio inputs on your stereo TV, stereo VCR, or optional stereo amplifier.
Connect to the composite video input on your VCR (or a standard TV).
Connect to the optical digital audio input on optional digital audio equipment, such as an audio decoder or home
theater receiver.
Connect another optional
HDMI
Connect to the HDMI input on your HDTV.
Connect to compatible optional equipment that supports a USB 2.0 interface.
Connect your set-top box's power supply unit here. Make this connection last of all.
Removal will interrupt your service.
PX022ANx USER GUIDE Draft 15/01/13 (501-341930X)
USB
® video and
For connection
to USB device
HDMI Out To TV
HDMI video and
audio output
DOCSIS MAC:
XX XX XX XX XX XX
CableCARD™ module
(behind cover) Removal
will interrupt your service
device (allowing the device's output to loop through the set-top box to the TV).
Power
(Make this connection
last of all)
6