Removing The Hard Disk Drive - Intel M570TU Service Manual

Removing the Hard Disk Drive

The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" serial (SATA) hard
disk drives with a height of 9.5mm (h). Follow your operating system's installation instructions, and install all necessary
drivers and utilities (as outlined in Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, and turn it over and remove the battery
2. Locate the component bay cover and remove screws
3. Remove the bay cover .
12
4. The hard disk assembly will be visible at point
a.
2
1
9
11
10
8
7
- .
1 11
on the mainboard.
13
3 4
5
6
(page 2 - 6).
b.
12
Disassembly
Figure 2
HDD Assembly
Removal
a. Remove the screws.
b. Remove the cover and lo-
cate the HDD.
13
12. Component
Cover
• 11 Screws
Removing the Hard Disk Drive 2 - 7
Bay