Cabinet And Rack Installation; Cabinet And Rack Requirements; General Requirements For Cabinets And Racks - Cisco Nexus 6000 Installation Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m .

Cabinet and Rack Installation

This appendix provides the requirements for cabinet and rack installation for the Cisco Nexus 6000
switch and includes the following sections:
•
•

Cabinet and Rack Requirements

This section provides the requirements for the following types of cabinets and racks, assuming an
external ambient air temperature range of 0 to 104
•
•
If you are selecting an enclosed cabinet, we recommend one of the thermally validated types: standard
Note
perforated or solid-walled with a fan tray.
Note Do not use racks that have obstructions (such as power strips), because the obstructions could impair
access to field-replaceable units (FRUs).
This section includes the following topics:
•
•

General Requirements for Cabinets and Racks

The cabinet or rack must be one of the following types:
•
The cabinet or rack must also meet the following requirements:
•
OL-15902-02
Cabinet and Rack Requirements, page A-1
Cable Management Guidelines, page A-2
Standard perforated cabinets
Standard open racks
General Requirements for Cabinets and Racks, page A-1
Requirements Specific to Perforated Cabinets, page A-2
Standard 19-in. (48.3 cm) (four-post EIA cabinet or rack, with mounting rails that conform to
English universal hole spacing per section 1 of ANSI/EIA-310-D-1992. See the
Specific to Perforated Cabinets" section on page
The minimum vertical rack space for the Cisco Nexus 6004 chassis must be four RU (rack units).
A P P E N D I X
o o
F (0 to 40 C):
A-2.
Cisco Nexus 6000 Series Hardware Installation Guide
A
"Requirements
A-1