Cisco Nexus 6004 Switch; Features - Cisco Nexus 6000 Installation Manual

Cisco Nexus 6004 Switch

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 6 k d o c s @ c i s c o . c o m .
The platform supports a Twinax copper cabling solution that connects to standard QSFP connectors for
Note
in-rack use, and optical cabling for longer cable runs:
For in-rack or adjacent-rack cabling, the Cisco Nexus 6001 supports QSFP+ direct-attach 40 Gigabit
Ethernet copper cables, an innovative solution that integrates transceivers with Twinax cables into an
energy-efficient, low-cost, and low-latency solution. QSFP+ direct-attach 40 Gigabit Twinax copper
cables use only 1.5 watt (W) of power per transceiver and introduce approximately 0.1 microsecond of
latency per link.
|For longer cable runs, the Cisco Nexus 6001 supports multimode, short-reach optical QSFP+
transceivers. These optical transceivers use approximately 1.5W per transceiver and have a latency of
approximately 0.1 microsecond.
Cisco Nexus 6004 Switch
This section describes the Cisco Nexus 6004 Switches (N6K-C6004-96Q and N6004-B-24Q) and their
components. This section includes the following topics:
•
•
•
•
•
•

Features

The Cisco Nexus 6004 offers the industry's highest 10 and 40 Gigabit Ethernet and Fibre Channel over
Ethernet (FCoE) port density in a compact energy-efficient form factor, with integrated Layer 2 and
Layer 3 features at wire speed and low latency of approximately 1 microsecond for any packet size. With
a choice of front-to-back or back-to-front airflow options, the switch is designed for a broad range of
traditional data center and large-scale virtualized cloud deployments. The Cisco Nexus 6004 switches
are 4RU switches. The N6K-C6004-96Q is a 96-port,10/40-Gigabit Ethernet and Fibre Channel over
Ethernet (FCoE) switch and has the following features:
•
•
•
•
•
•
The Cisco Nexus 6004 Extensible Fixed (EF) version (N6004-B-24Q) offers eight line-card expansion
module (LEM) slots to support a total of 96 ports of 40 Gbps throughput in a fully populated system. It
provides low-cost entry point for small-scale deployments. Each LEM supports 12 ports of 40 Gigabit
Ethernet in a QSFP form factor. Each 40 Gigabit Ethernet port can also be split into four line-rate 10
Cisco Nexus 6000 Series Hardware Installation Guide
1-6
Features, page 1-6
Chassis, page 1-7
Ports, page 1-9
Power Supply, page 1-10
Fan Module, page 1-11
Transceivers, page 1-13
48 fixed ports on the back of the switch
Four slots on the back of the switch for expansion modules.
Six slots on the front of the switch for hot swap-capable power supplies, which provide front-to-back
and back-to-front airflow for cooling
Four slots on the front of the switch for hot swap-capable fan modules.
One console management port on the front of the switch.
One USB port on the front of the switch.
Chapter 1 Overview
OL-15902-01