Table of Contents
Advertisement
kWARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
CAUTION
Moving parts!
To reduce
the risk
of
personal
injury,
DO NOT touch
the
agitator
when vacuum
cleaner
is on.
Contacting
the agitator
while
it is
rotating
can cut,
bruise
or cause
other
injuries.
Always
unplug
from
electrical
outlet before servicing.
Use caution
when
operating
near
small children.
Removing
and Installing
Lower Plate
f_
Latches
Lower Plate
Loquets
/
Plaque
inferieure
_guetas
_,
Base inferior
Deux vis
Dos tornfllos
> Before servicinq any parts,
disconnect vacuum cleaner from
electrical outlet.
> Place paper under nozzle anytime
lower plate is removed to protect
floor.
Place handle in upright position and
turn vacuum cleaner over to expose
lower plate.
Remove two (2) screws and press
latches downward to release lower
plate.
> Remove lower plate and remove any
residue that may exist in belt area.
> Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
> Press lower plate into place, snap
latches into place, and reinstall
two
(2) screws.
- 26 -
Advertisement
Table of Contents
